YAYKEYCard knowledge platform
English
Explore →

Card Knowledge Library

From optical inspection to collecting know-how.
Explore the details behind each card.

Full-Frame Card Centering: Parameter Definitions and Recalculation

3 min read
Key takeaway

Judging centering on a full-frame card depends on the measured widths of the left and right borders, not on visual impression. This article breaks 55/45 into measurable geometric quantities: total left-right border width S, one-side offset and the difference between the two sides, gives a worked example with S=6mm, and explains sources of error in non-contact imaging and rechecks.

On this page

Border Parameter Matrix for 55/45 Centering on Full-Frame Cards

55/45 describes the ratio of the left border width to the right border width; the basis for judgment is measured width, not first impression.

First define the quantities clearly: S means only the sum of the widths of the left and right borders (S = L + R), not the width of the whole card. 55/45 means the left border accounts for 55% of S and the right border for 45%, a difference of 10% of S between the two sides.

Parameter Definition Value under 55/45 What to observe
S Left border L + right border R 6mm in the worked example here Measure only the left and right borders
One-side offset Deviation of one side from the even split 0.05S Not the same quantity as the left-right width difference
Left-right width difference L − R 0.10S Equal to twice the one-side offset
Direction of judgment Which side is wider Left wider, right narrower Fix the card face orientation before recording

Before measuring, first determine the card face orientation and the up-down direction, then record L and R one by one, so that the top and bottom borders are not mixed into the left-right ratio.

Worked Example of One-Side Offset and Left-Right Width Difference for 55/45

Applicable conditions: S is the sum of the widths of the left and right borders, the measurement direction is perpendicular to the card edge, and the unit is uniformly millimeters. The one-side offset describes the deviation of one side from the even-split position, while the left-right width difference describes the actual difference between the left and right borders; the two differ by a factor of two, so a report should state which one is used.

Perspective and Recheck Error in Full-Frame Card Border Measurement

A common reason a card looks off to the eye is that the card is not squared up, the line of sight is not perpendicular to the card face, or ambient light casts a shadow on one border, making the narrow side look narrower. When measuring with images, the lens optical axis should be as perpendicular to the card face as possible, and the card edges should be parallel to the frame edges, to avoid perspective compression from oblique shooting.

When recording, write down the measured L and R directly, then calculate S and the difference; do not estimate the ratio first and work backward to the widths. For a recheck, it is advisable to change the placement orientation once or use another device, and to verify the readings against the device's stated accuracy; if the two results differ noticeably, first check placement and light position rather than immediately revising the centering judgment.

Follow-Up Questions on Rechecking 55/45 Centering on Full-Frame Cards

With a one-side offset of 0.30mm and a left-right width difference of 0.60mm, which one should the report state?

Just state the definition clearly. The one-side offset is the deviation of one side from the even split, and the left-right width difference is the actual difference between the left and right borders; on the same card the latter is twice the former, and mixing them makes the reading appear to differ by a factor of two.

When the two border readings disagree on a recheck, what should be checked first?

First check whether the card is squared up, whether the lens is perpendicular to the card face, and whether the light position casts a shadow on one side; then verify the readings against the device's stated accuracy, and compare the two results only after confirming the measurement conditions are consistent.

YAYKEY LAB · OPTICAL REVIEW

Custom Art Slab & Optical Archive

Custom Slab
Silent loop
Open original video ↗
Customize top labels and full-frame UV printing with crystal-clear card protection. Available with on-site encapsulation, multi-light optical inspection, and digital grading archives.
Explore YAYKEY optical pre-inspection